KX-TCD725EM-3(38~64) 01.10.24 14:38 Page 45

Setting the Range Warning Alarm ON/OFF

The factory preset is OFF.

Make sure that the power is ON (p. 12), and the unit is in the standby mode.

1Press .

2Press or until the arrow points to “Setting Handset”, then press .

3Press or until the arrow points

to “Tone Option”, then press .

4Press or until the arrow points

to “Range Alarm”, then press .

The current setting is at the arrow.

5Press or to select “ON” or “OFF”.

6Press .

A beep sounds.

The display will return to “Range

Alarm”. To return to the standby mode,

press or wait for 60 seconds.

You can exit the programming mode any time

by pressing .

Chapter 3 Programmable

Setting the Battery Low Alarm ON/OFF

The factory preset is ON.

Make sure that the power is ON (p. 12), and the unit is in the standby mode.

1Press .

2Press or until the arrow points to

Setting Handset”, then press .

3Press or until the arrow points to

Tone Option”, then press .

4Press or until the arrow points to

Battery Alarm”, then press .

The current setting is at the arrow.

5Press or to select “ON” or “OFF”.

6Press .

A beep sounds.

The display will return to “Battery

Alarm”. To return to the standby mode,

press or wait for 60 seconds.

You can exit the programming mode any time

by pressing .

Function on the Handset

45

Page 45
Image 45
Panasonic kx-tcd725em operating instructions Setting the Range Warning Alarm ON/OFF, Setting the Battery Low Alarm ON/OFF