34
Phonebook
Phonebook Copy
You can copy the caller information in the phonebook between the handsets registered in the same
base unit. The phonebook copy must be operated in intercom mode (p. 83).
Ex. Handset 2 is copying the phonebook to Handset 1 during an intercom call.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
Station 2 (Sender):
1Press .
2Press or until the arrow points
to “Send Phonebook”, then press .
•The phonebook is displayed.
3Press . Press or until the
name you desire to copy is displayed,
then press .
4Press or until the arrow points
to “Copy Entry”, then press .
•“Copy Proceeding” is on the display
and the selected information is copied.
•After copying is completed, a beep sounds
and “Copy Complete” is displayed.
•After a few seconds, the display will return
to the intercom call.
•If “Copy Incomplete” is displayed, the
receiver handset memory is full.
•If “Copy Failure” is displayed, the receiver
and/or sender did not prepare for copying
within 60 seconds.
Station 1 (Receiver):
1During an intercom call, press .
2Press or until the arrow points
to “Recv Phonebook”, then press .
•“Copy Proceeding” is on the display.

To copy a selected caller information in the phonebook

KX-TCD725EM-2(24~37) 01.10.24 14:37 Page 34