18
Paging
In multi-unit user operation, conversation between handsets is available with intercom feature (p. 83).
Make sure that the power is ON (p. 12), and the unit is in the standby mode.

Paging the Handset from the Base Unit (Handset Locator)

Using this feature, you can locate a misplaced handset.
1Press on the base unit.
•The handset rings for 1 minute and “ ” flashes.
2To stop paging, press , to , , , or on the handset or
on the base unit.
INT
9
0

Selecting the Ringer Type for Paging

You can select one of 20 ringer types for paging.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
1Press .
2Press or until the arrow points
to “Setting Handset”, then press
.
3Press or until the arrow points
to “Ringer Option”, then press .
4Press or until the arrow points
to “Paging Type”, then press .
•The current setting is at the arrow and
rings.
5Press or to select the desired
ringer type.
•Each time you press a button, selected
ringer type sounds.
6Press .
•Abeep sounds.
•The display will return to “Paging
Type”. To return to the standby mode,
press or wait for 60 seconds.
Paging Type
H
Ringer 1
Ringer 2
KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 18