Panasonic kx-tcd725em Selecting the Base Unit Access, Automatic base unit access Auto

KX-TCD725EM-4(65~85) 01.10.24 14:39 Page 81

Selecting the Base Unit Access

Automatic base unit access (Auto)

The handset automatically selects a registered base unit.

•When the handset moves to another base unit radio area, it loses contact with the previous base unit and automatically accesses the new base unit.

•If the handset is in the overlap area between several base unit radio areas, the handset will access the nearest base unit.

Specified base unit access

You can select one registered base unit (1 to 4) you desire to operate.

•You can choose the base unit/telephone line where you can make/receive calls. The factory preset is Auto (automatic base unit access).

1Press .

2Press or until the arrow points to “Setting Handset”, then press .

3Press or until the arrow points

to “Select Base”, then press .

•The current setting, “Auto” or a registered base unit number is at the arrow.

Select Base

HAuto Base 1

4Press or to select the desired base unit.

5Press .

•A beep sounds and the handset will return to the standby mode.

•The selected base unit number will be displayed.

•You can exit the programming mode any time

by pressing .

Multi-Unit User Operations Chapter 6

81