73
Chapter 5 Answering System
Selecting Receiver Volume During Playback
1Press . Press or until the arrow points to “Receiver Volume”,
then press .
OR
Press .
2Press to decrease volume, or press to increase volume.
•Each time you press or , the volume level will change.
3
Receiver Volume
LOW123456 HIGH
*Toll Saver (When set to “AUTO”)
When you call the unit from a touch tone
telephone:
If the unit answers on the 2nd ring, there is at
least one new message.
If the unit answers on the 5th ring, there are
no new messages.
Hang up when you hear the 3rd ring.This
will save you the toll charge for the call.
1Press .
2Press or until the arrow points
to “Setting Base”, then press .
•“Input Command” is displayed.
3Press .
•“Remote Operation” is displayed on
the handset.
4Press .
5Press dialling button , or to
to set the number of rings.
0: Selects “AUTO”.
2-7: The unit will answer after the selected
number of rings.
7
2
0
2
6Press .
•The display will return to “Setting
Base”. To return to the standby mode,
press .
Selecting the Number of Rings
You can select the number of times the unit rings before the answering system answers a call, from 2
to 7 or AUTO (for Toll Saver*). The factory preset is AUTO.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
KX-TCD725EM-4(65~85) 01.10.24 14:39 Page 73