78
Direct Remote Operation
Once you have entered the remote code, you can also control your unit by direct commands instead of
using the voice menu. Hang up anytime to end the remote operation.

Direct commands

NEW MESSAGE PLAYBACK
•Only new messages are played back.
ALLMESSAGE PLAYBACK
•All messages are played back.
REPEAT (During playback)
•The current message is repeated.
SKIP(During playback)
•The current message is skipped. The
next message is played.
STOP(During playback)
GREETING MESSAGE RECORDING
•Talk immediately after the long beep.
•The recording is stopped.
•The recorded message is played.
RECORD
4
5
1
2
9
7
9
4
5
0
ERASING ASPECIFIC MESSAGE
(During playback)
•The current message is erased.
•Ashort beep will sound and the
next message will be played.
ERASING ALLMESSAGES
•All recorded messages are
erased.
•Along beep sounds and “
No
message
�� is heard.
ERASING GREETING MESSAGE
ANSWERING SYSTEM OFF
•“
Answer off
” is heard.
•The unit hangs up and will not
answer calls until turned on again.
DISCONNECT
•The call is terminated and
messages will be saved.

Turning on the answering system

1Call your unit and wait for 20 rings.
2Press the remote code within 10 seconds after the long beep.
•The unit will answer and the greeting message will be played.
•The answering system will turn on. Hang up or enter the remote code for other options.
•When turning on the answering system using a rotary or pulse service telephone, you cannot
enter the remote code for other options.
•If your remote code is not stored, you cannot turn on the answering system remotely.
Remote Operation from a Touch Tone Phone
KX-TCD725EM-4(65~85) 01.10.24 14:39 Page 78