Panasonic kx-tcd725em operating instructions Selecting Characters, To change the character mode

KX-TCD725EM-2(24~37) 01.10.24 14:37 Page 27

Selecting Characters

The dialling buttons can be used to enter letters and character symbols. The letters are printed on the dialling buttons. Pressing each button selects a character as shown on page 28, 29.

To change the character mode

You can select one of 6 character modes by pressing during entering a name procedure. The factory preset is “ABC”.

1 Press			while entering a name.					<Enter Name>
2 Press		or	until the arrow points
to the desired character mode, then press				.
					H ABC
• The character mode is displayed.
								0–9
								ΑΒΓ
	ABC: Alphabet (Capital/lower*)							: Russian
			0–9: Numeric			: Extended 2 (Capital/lower*)
			ΑΒΓ : Greek		AÄÅ: Extended 1 (Capital/lower*)

*To change from capital to lower case, press . Each time you press , the mode will change.

For example, to enter “Anne”:

1. Press	2	then .			A
2. Press		then	6	TWICE.
					A	n
3. Press		then	6	TWICE.
					An		n
4. Press	3	TWICE.
					Ann			e

Chapter 2 Cordless Telephone

If you make a mistake while entering a name

Press or to move the cursor to the incorrect character, press C to delete, and enter the correct character. Pressing C erases the character to the left of the cursor. To erase all characters, press and hold C .

27