Panasonic kx-tcd725em Incoming/Memo Message, To playback new incoming/memo messages

KX-TCD725EM-4(65~85) 01.10.24 14:39 Page 69

Incoming/Memo Message

Incoming messages and memo messages are stored in chronological order. New messages cannot be recorded when “Memory is Full” is heard. We recommend you to erase unnecessary message after each playback in order to leave more time for recording new incoming/memo message(s).

Make sure that the power is ON (p. 12), and the unit is in the standby mode.

To playback new incoming/memo message(s)

1Press (INT) then .

2Press or until the arrow points

to “Play New Msg”, then press .

OR

Press (4).

•New incoming/memo message(s) is/are played back from the speaker on the handset if recorded.

•The unit will announce the remaining recording time after playback.

•The display will return to “Remote

Operation”. To return to the standby

mode, press or wait for 30 seconds.

To erase one incoming/memo message with function menu

1During playback an/a incoming/memo

message, press .

2Press or until the arrow points to

“Erase One Msg”, then press .

3Press or to select “Yes”, then

press .

•One incoming/memo message is erased.

•The display will return to “Remote

Operation”. To return to the standby

mode, press or wait for 30 seconds.

To playback all incoming/memo message(s)

1 Press (INT) then			.
2 Press	or		until the arrow points
to “Play	All		Msg”, then press	.
OR
Press (5).
• All incoming/memo message(s) is/are
played back from the speaker on the
handset if recorded.
• The unit will announce the remaining
recording time after playback.
• The display will return to “Remote					Chapter
To erase one incoming/memo
Operation”. To return to the standby
mode, press			or wait for 30 seconds.
message with direct command					5
1 During playback an/a incoming/memo					Answering
message, press			.
2 Press	then	4 .
• One incoming/memo message is erased.
• The display will return to “Remote					System
Operation”. To return to the standby
mode, press			or wait for 30
seconds.

69