Panasonic kx-tcd725em Cancelling a Base Unit, Enter the handset numbers you desire to cancel

KX-TCD725EM-4(65~85) 01.10.24 14:39 Page 82

Registration

Cancelling a Handset Registration in the Base Unit

Each handset can cancel itself or another handset.

Make sure that the power is ON (p. 12), and the unit is in the standby mode.

1Press .

2Press or until the arrow points

to “Setting Base”, then press .

•“Input Command” is displayed.

3Press 7 .

4Enter the 4-digit base unit PIN (p. 55).

•The current registered handset number(s) is/are displayed.

Cancelling a Base Unit

5Enter the handset number(s) you desire to cancel.

•The selected handset number(s) flash(es).

Input Command

7123456

•If you misdial, press the number(s) again.

6Press .

•A beep sounds.

•The display will return to “Setting

Base”. To return to the standby mode,

press or wait for 60 seconds.

•You can exit the programming mode any time

by pressing .

If another handset is out of range and/or its power is OFF when cancelling a handset registration in the base unit, the previous base unit number will still remain in the cancelled handset. Therefore, you need to cancel the base unit registered in the cancelled handset.

Make sure that the power is ON (p. 12), and the unit is in the standby mode.

1Press .

2Press or until the arrow points to “Setting Handset”, then press .

3Press or until the arrow points

to “Registration”, then press .

4Press or until the arrow points

to “Cancel Base”, then press .

•“Enter H/set PIN” is displayed.

5Enter the 4-digit handset PIN (p. 40).

•Registered base unit(s) is(are) displayed.

82

6Press or until the arrow points to the base unit(s) you desire to cancel,

then press .

•“ ” marks the selected base unit.

7Press .

•“Clear ?” is displayed.

8Press or to select “YES” , then

press .

•A beep sounds and “CLEARED” is displayed.

•To return to the standby mode, press

.