Panasonic kx-tcd725em Changing the 4-digit Handset PIN, To Setting Handset, then press

KX-TCD725EM-3(38~64) 01.10.24 14:38 Page 40

Handset PIN

Changing the 4-digit Handset PIN

You can program a 4-digit handset PIN (Personal Identification Number). The factory preset is 0000. Changing the PIN may prevent the unauthorised use of your unit by another person.

Once you have programmed the 4-digit Handset PIN, you cannot confirm it. We recommend you to write down your 4-digit Handset PIN. If you forget it, please consult your Panasonic Customer Care Centre.

You need to enter the 4-digit handset PIN for the following functions.

—To set the call prohibition mode ON/OFF (p. 50).

—Reset Handset Settings (p. 53).

—To cancel the base unit (p. 82).

Make sure that the power is ON (p. 12), and the unit is in the standby mode.

1Press .

2Press or until the arrow points

to “Setting Handset”, then press

.

3Press or until the arrow points

to “Other Option”, then press .

4Press or until the arrow points to “Change Hset PIN”, then press .

Enter Old PIN 1234567890 :----

5Enter the current 4-digit handset PIN.

•The factory preset is 0000.

6Enter the new 4-digit handset PIN TWICE.

•If you misdial, press C . Digits are erased from the right. To erase all digits, press and hold C .

1st	Enter New	PIN
	1234567890	:----
2nd	Verify New	PIN
	1234567890	:----

•A beep sounds.

•To return to the standby mode, press

or wait for 60 seconds.

•If 5 beeps sound in step 5, the entered 4-digit handset PIN is incorrect. Enter the correct PIN.

4-digit handset PIN

40