Panasonic kx-tcd725em Time Alarm Selecting the Ringer Type for Time Alarm, To stop the time alarm

KX-TCD725EM-3(38~64) 01.10.24 14:38 Page 42

Time Alarm

Selecting the Ringer Type for Time Alarm

You can select one of 20 ringer types for the time alarm. The factory preset is type 1.

Make sure the the power is ON (p. 12), and the unit is in the standby mode.

1Press .

2Press or until the arrow points to “Setting Handset”, then press .

3Press or until the arrow points

to “Ringer Option”, then press .

4Press or until the arrow points to

“Alarm Type”, then press .

•The current setting is at the arrow and rings.

Alarm Type

H Ringer 1

Ringer 2

5Press or to select the desired ringer type.

•Each time you press a button, the selected ringer type sounds.

6Press .

•A beep sounds.

•The display will return to “Alarm Type”.

To return to the standby mode, press

or wait for 60 seconds.

•You can exit the programming mode any time

by pressing .

To stop the time alarm

When the alarm sounds and “Time Alarm” is displayed, press any dialling button 0 to

9, , , or .

•After 30 seconds, the alarm will stop ringing and the display returns to the standby mode.

•If “Once” is selected, the setting is automatically turned off. If “Repeat Daily” is selected, the setting remains and the alarm will repeatedly sound at the setting time.

•If the unit is in the talk, speakerphone or intercom mode during the alarm time, the alarm will not sound. After finishing a conversation, the alarm will start ringing.

•If the alarm sounds during charging, the alarm will stop ringing when you lift the handset from the cradle.

42