Panasonic kx-tcd725em Setting the Call Restriction, When you dial a restricted number

KX-TCD725EM-3(38~64) 01.10.24 14:38 Page 61

Call Restriction

You can restrict desired handset(s) from dialling selected phone numbers. Phone numbers beginning with the restricted digits cannot be dialled out. For example, if “00” is assigned as the call restriction number, international calls cannot be made.

For selected handset(s), you can assign up to 6 call restriction numbers (up to 8 digits). The factory preset is OFF.

Setting the Call Restriction

Make sure that the power is ON (p. 12), and the unit is in the standby mode.

1Press .

2Press or until the arrow points

to “Setting Base”, then press .

•“Input Command” is displayed.

3Press 6 , then enter the 4-digit base unit PIN (p. 55).

•All registered handset number(s) is/are displayed.

•The handset number(s) flash(es) if the call restriction number(s) is/are already stored. Ex. 6 handsets are registered.

Input Command 12 6 123456

4Enter the handset number(s) which you desire to restrict.

•The selected handset number(s) flash(es).

•If you misdial, press the number(s) again.

Ex. Handset number 5 is selected.

Input Command 12 6 123456

5Press .

6Enter a call restriction number, up to 8 digits.

• If you misdial, press C . The digits are erased from the right. To erase all digits, press and hold C .

7Press .

•A beep sounds.

•If you desire to set another call restriction, follow steps 6 to 7. If you finish, go to step 8.

8Press .

•The display will return to “Setting

Base”. To return to the standby mode,

press .

•You can exit the programming mode any time

by pressing .

Chapter 4 Programmable Function

When you dial a restricted number

The call is not succeeded, and the dialled number flashes. Ex. The restricted number is “00”.

00

on the Base Unit

61