43
Chapter 3 Programmable Function on the Handset
Ringer Option

Selecting the Handset Ringer Volume/Type

Make sure that the power is ON (p. 12), and the unit is in the standby mode.
•You can exit the programming mode any time
by pressing .
To select the handset ringer
volume
7 levels are available. The lowest level is 1. The
highest level is 6. The factory preset is 3. When
set to OFF, the handset will not ring.
1Press .
2Press or until the arrow points
to “Setting Handset”, then press
.
3Press or until the arrow points
to “Ringer Option”, then press .
4Press or until the arrow points
to “Ringer Volume”, then press .
•The current setting is displayed and rings.
5
Press
or
to select the desired level.
•Each time you press or , the
selected volume is displayed and rings.
To select the handset ringer
type for external/internal call
You can select one of 20 ringer types for each
external and internal call. The factory preset is
type 1.
1Follow steps 1 to 3 of To select the
handset ringer volume.
2Press or to select “Ext Ring
Type” for external call.
OR
Press or to select “Int Ring
Type” for internal call.
3Press .
•The current setting is at the arrow and
rings.
Ex. “Ext Ring Type” is selected.
4Press or to select the desired
type.
•Each time you press a button, the selected
ringer type sounds.
5Press .
•Abeep sounds.
•The display will return to step 2. To return
to the standby mode, press or wait
6Press .
•Abeep sounds.
•The display will return to “Ringer
Volume”. To return to the standby mode,
press or wait for 60 seconds.
•When set to OFF, “Ring Off” will be
displayed.
•To set to OFF, erase “ ” by pressing
until “OFF” is displayed.
Ringer Volume
LOW123456 HIGH
Ex. Level 6 is selected.
In “Ringer Option” menu, Selecting the ringer type for paging (p. 18), To select the ringer
type for private category (p. 25), andSelecting the ringer type for time alarm (p. 42) are also
available.
Ext Ring Type
H
Ringer 1
Ringer 2
KX-TCD725EM-3(38~64) 01.10.24 14:38 Page 43