Panasonic kx-tcd725em operating instructions Special Features, Pause Feature, Key Lock

KX-TCD725EM-2(24~37) 01.10.24 14:37 Page 36

Special Features

Pause Feature

(For Analogue PBX Line/Long Distance Service Users)

We recommend you to insert “Pause” if a pause is required for dialling with a PBX or to access a long distance service.

Make sure that the power is ON (p. 12), and the unit is in the standby mode.

Ex. Line access number 9 (PBX)

9		Phone number
				9
OR			H Pause
					Go Back
1 Press
	then 9 .
			9P1234567

2Press and press to select “Pause”.

3Enter a phone number.

•Selecting “Pause” creates a pause. “P” is displayed.

This prevents misdialling when you redial or dial a stored number.

•Selecting “Pause” more than once increases the length of the pause between numbers.

Key Lock

You can lock the handset dialling buttons. Only incoming calls are accepted while the key lock is ON .

Make sure that the power is ON (p. 12), and the unit is in the standby mode.

To set the key lock

Press and hold until a beep sounds.

•“[X]” is displayed and all dialling buttons are locked.

To cancel the key lock

Press and hold for about 2 seconds.

Base 1	[X]
10 New	Calls

06.09 04:04PM

•“[X]” will disappear and the key lock will be cancelled.

•The key lock will also be cancelled when the power is OFF (p. 12).

•When the key lock is ON, emergency calls can not be made until the key lock is cancelled.

36