KX-TCD725EM-3(38~64) 01.10.24 14:38 Page 55

Base Unit PIN

Setting the 4-digit Base Unit PIN

You can program a 4-digit base unit PIN (Personal Identification Number). The factory preset is 0000. Changing the PIN may prevent the unauthorised use of your unit by another person.

Once you have programmed the 4-digit base unit PIN, you cannot confirm it. We recommend you to write down the 4-digit base unit PIN. If you forget it, please consult your Panasonic Cutomer Care Centre.

You need to enter the 4-digit base unit PIN when using the following functions.

—Ringer Mode Selection (p. 56, 57)

—Call Restriction (p. 61)

—Selecting Time Break Recall/Earth Mode

—Cancelling a Handset Registration in the

(p. 59)

Base Unit (p. 82)

—Selecting the Pause Timing (p. 60)

—Reset the Base Unit Settings (p. 63)

Make sure that the power is ON (p. 12), and the unit is in the standby mode.

1Press .

2Press or until the arrow points

to “Setting Base”, then press .

Input Command” is displayed.

3Press 5 , then enter the current 4-digit base unit PIN.

The factory preset is 0000.

Input Command 5 ----

4Enter the new 4-digit base unit PIN TWICE.

Input Command 5 ---- ----

A beep sounds.

The display will return to “Setting

Base”. To return to the standby mode,

press or wait for 60 seconds.

If 5 beeps sound in step 3, the entered 4-digit base unit PIN is incorrect. Enter the correct 4- digit base unit PIN.

You can exit the programming mode any time

by pressing .

4-digit handset PIN

55

Chapter 4 Programmable Function on the Base Unit

Page 55
Image 55
Panasonic kx-tcd725em operating instructions Setting the 4-digit Base Unit PIN