Please Read and Save this Use and Care Book.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
❍Read all instructions.
❍To protect against risk of electrical shock do not immerse cord, plugs or appliance in water or other liquid.
❍Close supervision is necessary when any appliance is used by or near children.
❍Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
❍Avoid contacting moving parts.
❍Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. Or, call the appropriate toll-free number on the cover of this manual.
❍The use of attachments, including canning jars, not recommended by the manufacturer may cause fire, electric shock or injury.
❍Do not use outdoors.
❍Do not let cord hang over edge of table or counter.
❍Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used, but must be used only when the blender is not running.
❍Blades are sharp. Handle carefully.
❍To reduce the risk of injury, never place cutter-assembly blades on base without jar properly attached.
❍Always operate blender with cover in place.
❍Do not blend hot liquids.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
POLARIZED PLUG (120V Models Only)
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
ELECTRICAL CORD
a)A short power-supply cord (or detachable power-supply cord) is to be provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
b)Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
c)If a long detachable power-supply cord or extension cord is used,
1)The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance,
2)If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and
3)The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user- serviceable parts inside. Repair should be done only by authorized service personnel.
Note: If the power supply cord is damaged, it should be replaced by qualified personnel. In Latin America, by an authorized service center.
Product may vary slightly from what is illustrated.
1.Lid cap
2.Lid
3.Glass blending jar 1.26 L / 46 oz.
4.Handle
5.Gasket
6.Blade assembly
7.Jar base
8.Unit base
9.Controls (see A)
How to Use
This product is for household use only.
BLENDER JAR ASSEMBLY
1.Before first use, wash all parts except the unit base. Put the gasket on top of the blade assembly.
2.Place the blade assembly into the jar base and turn the jar base clockwise until tight.
3.Interlock System: Place the assembled jar onto the unit base and turn toward lock (
) until secured in place. You’ve engaged the interlock system if you lift the jar handle and the entire blender lifts together as one unit.
USING YOUR BLENDER
1.Be sure the unit is Off (Apagar) and plug the cord into a standard electrical outlet.
2.Place the food to be blended into the jar and the lid on the jar before blending.
3.When crushing ice or hard foods, keep one hand on the lid.
| | | | 4. | Choose the speed that best suits your task for |
| | | |
| | | | | food or beverage blending (A). Press the Baja/ |
| | | | |
| | | | | Alta (low/high) button in combination with the |
| | | | | task button when choosing or switching speeds. |
| | | | 5. | Use the Pulso (pulse) button for a few seconds, |
| | | | | then release for quick or delicate blending tasks. |
| | | | | Releasing the pulse automatically turns the |
| | | | | blender off. |
| | | | 6. | When finished blending, push the Apagar/Pulso |
| | Baja | Alta | | (off/pulse) button. |
| A | |
| | | | |
| | | | | |
| | | | | |
7. To remove the jar, grasp the handle, twist toward the unlock ( ) and lift it from the unit base. Remove the lid before pouring.
BLENDING TIPS AND TECHNIQUES
•Cut food into small pieces about ¾” (2 cm) before adding to the blender.
•When ingredients stick or spatter along the sides of the jar, stop the blending action and remove the lid. Use a rubber spatula to push food toward the blades. Replace the lid, then continue blending.
•Some of the tasks that cannot be performed efficiently with a blender are: beating egg whites, whipping cream, mashing potatoes, grinding meats, mixing dough, and extracting juices from fruits and vegetables.
•The following items should never be placed in the unit as they may cause damage: dried spices and herbs (ground alone), bones, large pieces of solidly frozen foods, tough foods such as turnips.
FAST CLEAN
1.The fast clean feature helps make it easier to clean the blender jar by loosening food particles. You may use the fast clean feature by filling the jar half full with lukewarm water. Add a little dish detergent for tough cleaning jobs (such as after making salsa, shakes or salad dressing). Hold the lid and press any button. Let the unit run for about 5 seconds, then press Apagar (off).
2.Unplug the unit, twist to unlock ( 
), lift the jar off the unit base and rinse.
3.Parts may be hand-washed. Follow the HAND-WASHING instructions below.
For hand-washing parts:
1.Before cleaning, turn off and unplug the blender.
2.Rinse parts immediately after blending for easier cleanup.
3.Wipe the unit base with a damp cloth and dry thoroughly. Remove stubborn spots by rubbing with a damp cloth and non-abrasive cleaner. Do not immerse the base in liquid.
4.Removable parts can be washed by hand or in a dishwasher. Do not place jars or parts in boiling liquids.
5.If liquids spill into the base, wipe with a damp cloth and dry thoroughly. Do not use rough scouring pads or cleansers on parts or finish.
manual.
Two-Year Limited Warranty
(Applies only in the United States and Canada) What does it cover?
•Any defect in material or workmanship provided; however, Applica’s liability will not exceed the purchase price of product.
For how long?
•Two year(s) from the date of original purchase with proof of such purchase. What will we do to help you?
•Provide you with a reasonably similar replacement product that is either new or factory refurbished.
How do you get service?
•Save your receipt as proof of date of sale.
•Visit the online service website at www.prodprotect.com/applica, or call toll-free 1-800-231-9786, for general warranty service.
•If you need parts or accessories, please call 1-800-738-0245.
What does your warranty not cover?
•Damage from commercial use
•Damage from misuse, abuse or neglect
•Products that have been modified in any way
•Products used or serviced outside the country of purchase
•Glass parts and other accessory items that are packed with the unit
•Shipping and handling costs associated with the replacement of the unit
•Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.)
How does state law relate to this warranty?
•This warranty gives you specific legal rights. You may also have other rights that vary from state to state or province to province.
is a registered trademark of The Black & Decker Corporation, Towson, Maryland, USA
¿Qué cubre esta garantía?
Esta Garantía cubre cualquier defecto que presenten las piezas, componentes y la mano de obra contenidas en este producto.
Requisitos para hacer válida la garantía
Para reclamar su Garantía deberá presentar al Centro de Servicio Autorizado la póliza sellada por el establecimiento en donde adquirió el producto. Si no la tiene, podrá presentar el comprobante de compra original.
¿Donde hago válida la garantía?
Llame sin costo al teléfono 01 800 714 2503, para ubicar el Centro de Servicio Autorizado más cercano a su domicilio en donde usted podrá encontrar partes, componentes, consumibles y accesorios.
Procedimiento para hacer válida la garantía
Acuda al Centro de Servicio Autorizado con el producto con la póliza de Garantía sellada o el comprobante de compra original, ahí se reemplazará cualquier pieza o componente defectuoso sin cargo alguno para el usuario final. Esta Garantía incluye los gastos de transportación que se deriven de su cumplimiento.
Excepciones
Esta Garantía no será válida cuando el producto:
A)Se hubiese utilizado en condiciones distintas a las normales.
B)No hubiese sido operado de acuerdo con el instructivo de uso que le acompaña.
C)Cuando el producto hubiese sido alterado o reparado por personas no autorizadas por Applica Manufacturing, S. de R. L. de C.V.
Nota: Usted podra encontrar partes, componentes, consumibles y accesorios en los centros de servicios autorizados. Esta garantía incluyen los gastos de transportación que se deriven de sus cumplimiento dentro de sus red de servicio.
es una marca registrada de The Black & Decker Corporation, Towson, Maryland, E.U.
Argentina
SERVICIO TECNICO CENTRAL ATTENDANCE
Avda. Monroe N° 3351 Buenos Aires – Argentina Fonos: 0810 – 999 - 8999
011 - 4545 - 4700
011 – 4545 – 5574
supervision@attendance.com.ar
Chile
MASTER SERVICE SERVICENTER Nueva Los Leones N° 0252 Providencia
Santiago – Chile
Fono Servicio: (562) – 232 77 22 servicente@servicenter.cl
Colombia
PLINARES
Avenida Quito # 88A-09 Bogotá, Colombia Tel. sin costo 01 800 7001870
Costa Rica
Aplicaciones Electromecanicas, S.A.
Calle 26 Bis y Ave. 3
San Jose, Costa Rica
Tel.: (506) 257-5716 / 223-0136
Ecuador
Servicio Master de Ecuador
Av. 6 de Diciembre 9276 y los Alamos Tel. (593) 2281-3882
El Salvador
Calle San Antonio Abad 2936
San Salvador, El Salvador
Tel. (503) 2284-8374
Guatemala
MacPartes SA
3ª Calle 414 Zona 9
Frente a Tecun
Tel. (502) 2331-5020 / 2332-2101
Honduras
ServiTotal
Contigua a Telecentro
Tegucigalpa, Honduras,
Tel. (504) 235-6271
México
Articulo 123 # 95 Local 109 y 112
Col. Centro, Cuauhtemoc,
México, D.F.
Tel. 01 800 714 2503
Nicaragua
ServiTotal
De semáforo de portezuelo 500 metros al sur. Managua, Nicaragua, Tel. (505) 248-7001
Panamá
Servicios Técnicos CAPRI Tumbamuerto Boulevard El Dorado Panamá
500 metros al sur.
Tel. 3020-480-800 sin costo (507) 2360-236 / 159
Perú
Servicio Central Fast Service
Av. Angamos Este 2431
San Borja, Lima Perú
Tel. (511) 2251 388
Puerto Rico
Buckeye Service
Jesús P. Piñero #1013
Puerto Nuevo, SJ PR 00920
Tel.: (787) 782-6175
Republica Dominicana
Plaza Lama, S.A.
Av, Duarte #94
Santo Domingo, República Dominicana Tel.: (809) 687-9171
Venezuela Inversiones BDR CA Av. Casanova C.C.
City Market Nivel Plaza Local 153 Diagonal Hotel Melia, Caracas.
Tel. (582) 324-0969
www.applicaservice.com
servicio@applicamail.com
