GE 200D8074P043, 49-60637 manual Inserting the door panels, Troubleshooting Tips Consumer Support

Inserting the door panels.

Read these instructions completely and carefully.

Insert the Freezer Panel and Fresh Food Panel.

Carefully push the freezer panel in until it slides into the	If your model has a dispenser, this step only applies to
slot behind the door handle. Push the filler panel	the fresh food panel and top freezer panel.
(required with some door panels) in behind the
decorator panel. Repeat for fresh food panel.

Insert the Bottom Freezer Panel (on dispenser models).

Carefully push the panel in until it slides into the slot	with some door panels) in behind the decorator panel.
behind the door handle. Push the filler panel (required

Attach the Top Trim on the Freezer and Fresh Food Doors.

The Top Trim can be found inside the refrigerator	of each door. Hand tighten only. Make sure
compartment.	that the top of each panel fits snugly behind
With a T-20 Torxdriver, attach the Top Trim, using two	the lip of the Top Trim.
screws on each Top Trim piece, to the top

Top Trim Screws

Cut-Out

Top Trim Screws

Safety Instructions Operating Instructions Installation Instructions

Cut-Out

Top

Freezer

Panel

Bottom

Freezer

Panel

Side Trim

Fresh

Food

Panel

Side Trim

21

Troubleshooting Tips Consumer Support