3Com MSR 30, MSR 50 manual Field

1092 CHAPTER 75: IS-IS DEBUGGING COMMANDS

Table 243 Description on the fields of the debugging isis adjacency command

Field Description

Rxed helloType IIH on circuitName contains Duplicate Ip Address. IIH Discarded

Rxed helloType IIH on % circuitName contains Duplicate Ipv6 Address. IIH Discarded

Rxed Serial IIH on circuitName, Protocol supported mismatch. IIH Discarded

The received hello packet was discarded because it contains a duplicate IP address. helloType: Hello packet type: LAN L1, LAN L2, or P2P.

circuitName: Interface name

The received hello packet was discarded because it contains a duplicate IPv6 address.

helloType: PDU packet type: LAN L1, LAN L2, or P2P.

circuitName: Interface name

The received hello packet was discarded due to a protocol mismatch.

circuitName: Interface name

Rxed P2P IIH on % circuitName contains no Protocol Support at all. IIH Ignored

Rxed Ethernet IIH on circuitName. Ignored

helloType Level Mismatch.Local Level circuitLevel

helloType, No common protocol supported

Rxed LAN IIH from system : %systemId

Rxed P2P IIH from system : %systemId

Rxed ISH from system : %systemId

The received hello packet was discarded due to no protocol support.

circuitName: Interface name

The received Ethernet IIH packet was discarded because the interface type is not broadcast.

circuitName: Interface name

Packet type mismatch

helloType: Hello packet type: LAN L1, LAN L2, or P2P.

circuitLevelI: Current level of the link. It can be L1, L2, or L12.

The received hello packet matched no protocol.

helloType: Hello packet type: LAN L1, LAN L2, or P2P.

IS-IS received an Ethernet IIH packet.

systemId: System ID of the sending device.

IS-IS received a P2P IIH packet.

systemId: System ID of the sending device.

IS-IS received an ISH packet.

systemId: System ID of the sending device.

Table 244 Description on the fields of the debugging isis authentication-error command

Field Description

For all processes of the VPN instance vpn-instance-name, Indication of authentication errors debugging is on

The authentication error debugging is enabled for all the IS-IS processes of the VPN instance.

For the process process-id, Indication of authentication errors debugging is on

The authentication error debugging is enabled for the IS-IS process.