3Com MSR 50, MSR 30 manual Domain default, Related command access-limit,state, display domain

1937

Use the undo domain command to remove an ISP domain.

By default, the system uses the domain of system. You can view its settings by executing the display domain command.

If the specified ISP domain does not exist, the system will create a new ISP domain.

All the ISP domains are in the active state when they are created.

Related command: access-limit,state, display domain.

Example # Create ISP domain aabbcc.net, and enter ISP domain view.

<Sysname> system-view [Sysname] domain aabbcc.net [Sysname-isp-aabbcc.net]

domain default

Syntax	domain default { disable enable isp-name}
View	System view
Parameter	disable: disables the configured default ISP domain.
	enable: Enables the configured default ISP domain.
	isp-name: Name of an existing ISP domain, a case-insensitive string of 1 to 24
	characters.
Description	Use the domain default command to manually configure the system default ISP
	domain.
	By default, the default domain is named system.
	Note that:
	■ There must be only one default ISP domain.
	■ When configure a default domain, this domain must have existed.
	■ The default domain configured cannot be deleted unless you cancel it as a
	default domain first.
Related command:	state, display domain.
Example	# Create a new ISP domain named aabbcc.net, and configure it as the default ISP
	domain.
	<Sysname> system-view
	[Sysname] domain aabbcc.net
	[Sysname-isp-aabbcc.net] quit
	[Sysname] domain default enable aabbcc.net