3Com MSR 30, MSR 50 manual Debugging bgp event, Route was deleted from the instance

1018 CHAPTER 73: BGP DEBUGGING COMMANDS

Table 224 Description on the fields of the debugging bgp detail command

Field Description

Received New VPNv4 Route with Ext-Community NULL.Ignoring Route

Received a new VPNv4 route with Ext-Community as NULL and therefore ignored the route.

Received VPNv4 Packet But No Such Route In	Received a VPNv4 packet and there is no such
Loc Rib	a route in the local routing table
operation XX	Label operation code
Receive SMB UP backup requirement	Received a standby board startup event
	requesting an active/standby switchover
Receive routine backup requirement	Received a routine request for an
	active/standby switchover
Receive SMB down backup requirement	Received a standby board down event
	requesting an active/standby switchover

Examples # Enable detailed debugging for BGP when a BGP peer relationship is being established.

<Sysname> debugging bgp detail

*Aug 24 14:12:13:674 2006 Sysname RM/6/RMDEBUG:

BGP_L3VPN: Recv UPDATE with following RD 100:1 destination 11.1.1.1 - Received New VPNv4 Route with Ext-Community NULL..Ignoring Route

//BGP received an UPDATE message with RD 100:1, destination address 11.1.1.1. The Ext-Community of the new VPNv4 route is NULL and therefore the route was ignored.

DeLocRemCross: Deleting route From Target Instance.

// The route was deleted from the instance

debugging bgp event

Syntax debugging bgp [ ipv4-address ipv6-address ] event

undo debugging bgp [ ipv4-address ipv6-address ] event

View User view

Default Level 1: Monitor level

Parameters ipv4-address: IPv4 address of a peer.

ipv6-address: IPv6 address of a peer.

Description Use the debugging bgp event command to enable event debugging for BGP.

Use the undo debugging bgp event command to disable event debugging for

BGP.