Sony MZ-NF810 Reset the Error Display Code

16
MZ-NF810/NF810CK
• Description of indication history
Histor y code number Description
1The first error
NThe last error
N1 One error before the last.
N2 Two errors before the last.
R_ Total recording time
Reset the Error Display Code
After servicing, reset the error display code.
•Setting method of reset the error display code
1. Set the test mode (see page 13).
2. Pressing the [GROUP] key or pressing the [DISPLAY] key on
the remote commander activates the self-diagnosis result dis-
play mode.
3. To reset the error display code, press the [REC] key or
key on the remote commander (twice) when the code is dis-
played (except “R_****”).
(All the data on the 1, N, N1, and N2 will be reset)
• Description of error indication codes
Problem Indication code Meaning of code Simple display Description
No error 00 No error --- No error
01 Illegal access target Adrs Attempt to access an abnormal address
address was specified
Servo system error 02 High temperature Temp High temperature detected
03 Focus error Fcus Disordered focus or can not read an address
04 Spindle error Spdl Abnormal rotation of disc
TOC error 11 TOC error TOC Faulty TOC contents
12 Data reading error Data Data could not be read at SYNC
13 TOC address error Tadr TOC address data error
Power supply system error 22 Low battery LBat Momentary interruption detected
31 Offset error Ofst Offset error
32 Focus error ABCD ABCD Focus error ABCD offset error
offset error
33 Tracking error TE Tracking error Offset error
Offset system error Offset error
34 X1 tracking error X1TE X1 tracking error Offset error
Offset error
35 MD DATA 2 MD2 MD DATA 2 disc error
disc error
36 Mirror error Mirr Mirror retry over