3Com MSR 30, MSR 50 manual Dot1x timer

1910 CHAPTER 126: 802.1X CONFIGURATION COMMANDS

#Specify port Ethernet 1/9 to send a trap packet when detecting that a user is trying to login through a proxy.

<Sysname> system-view

[Sysname] dot1x supp-proxy-check trap

[Sysname] dot1x supp-proxy-check trap interface ethernet 1/9

Or

<Sysname> system-view

[Sysname] dot1x supp-proxy-check trap

[Sysname] interface ethernet 1/9 [Sysname-Ethernet1/9] dot1x supp-proxy-check trap

dot1x timer

Syntax dot1x timer { handshake-periodhandshake-period-value quiet-periodquiet-period-value server-timeoutserver-timeout-value supp-timeoutsupp-timeout-value tx-periodtx-period-value }

undo dot1x timer { handshake-period quiet-period server-timeout supp-timeout tx-period }

View System view

Parameter handshake-period-value: Setting for the handshake timer in seconds. It ranges from 5 to 1024 and defaults to 15.

quiet-period-value: Setting for the quiet timer in seconds. It ranges from 10 to 120 and defaults to 60.

server-timeout-value: Setting for the server timeout timer in seconds. It ranges from 100 to 300 and defaults to 100.

supp-timeout-value: Setting for the supplicant timeout timer in seconds. It ranges from 10 to 120 and defaults to 30.

tx-period-value: Setting for the username request timeout timer in seconds. It ranges from 10 to 120 and defaults to 30.

Description Use the dot1x timer command to set 802.1x timers.

Use the undo dot1x timer command to restore the defaults.

Several timers are used in the 802.1x authentication process to guarantee that the supplicants, the authenticators, and the RADIUS server interact with each other in a reasonable manner. You can use this command to set these timers:

■Handshake timer (handshake-period): After a supplicant passes authentication, the authenticator sends to the supplicant handshake requests at this interval to check whether the supplicant is online. If the authenticator receives no