![](/images/new-backgrounds/1123648/12364885x1.webp)
Limit CPUID Max. to 3
Enabled | Limit CPUID Maximum value to 3 when use older OS like NT4. |
Disabled | Disables CPUID Limit for windows XP.(Default value) |
No-Execute Memory Protect (Note)
Enabled | Enable |
Disabled | Disable |
CPU Enhanced Halt (C1E) (Note)
Enabled | Enable CPU Enhanced Halt (C1E) function.(Default value) |
Disabled | Disable CPU Enhanced Halt (C1E) function. |
CPU Thermal Monitor 2 (TM2) (Note)
Enabled | Enable CPU Thermal Monitor 2 (TM2) function.(Default value) |
Disabled | Disable CPU Thermal Monitor 2 (TM2) function. |
CPU EIST Function (Note)
Enabled | Enable CPU EIST function.(Default value) |
Disabled | Disable CPU EIST function. |
Virtualization Technology
Enabled | A VMM can utilize the additional hardware capabilities provided by |
| Virtualization Technology. (Default value) |
Disabled | Disabled this function. |
Delay For HDD (Secs)
Set delay HDD time from 0~15(secs).
Init Display First
This feature allows you to select the first initiation of the monitor display from which card when you install a PCI card and a PCI Express VGA card on the motherboard.
PCI | Set Init Display First to PCI VGA card. |
PEG | Set Init Display First to PCI Express VGA card (PCIE_16_1 slot). (Default value) |
PEG2 | Set Init Display First to PCI Express VGA card (PCIE_16_2 slot). |
DRAM Data Integrity Mode
ECC | Enable Memory Error Checking and Correction feature when all installed DIMMs |
| are 72bits width. |
Set DRAM Data Integrity Mode to |
English
- 43 - | BIOS Setup |