Intel GA-G1975X user manual Configuring RAID set in RAID BIOS, English, Create RAID Volume¡G

English

(3)Configuring RAID set in RAID BIOS

Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed to Section 4 if you do not want to create RAID.

Step 1:

After the POST memory test begins and before the operating system boot begins, look for a message which says "Press <Ctrl-I> to enter Configuration utility" (Figure 4). Press CTRL+ I to enter the RAID BIOS setup utility.

Intel(R) Matrix Storage Manager option ROM V5.0.0.1032 ICH7R wRAID5

Copyright(C) 2003-05 Intel Corporation. All Rights Reversed.

RAID Volumes :

None Defined.

Physical Disks :
Port	Driver Model		Serial #	Size	Type/Status(Vol ID)
0	ST3120026AS		3JT354CP	111.7GB	Non-RAID Disk
1	ST3120026AS		3JT329JX	111.7GB	Non-RAID Disk
Press		to enter Configuration Utility
	<CTRL - I>

Figure 4

Step 2:

After you press CTRL+ I, the Create RAID Volume screen will appear (Figure 5).

Create RAID Volume¡G

If you want to create RAID array, select Create RAID Volume in Main Menu and press ENTER.

Intel(R) Matrix Storage Manager option ROM V5.0.0.1032 ICH7R wRAID5

Copyright(C) 2003-05 Intel Corporation. All Rights Reversed.

[ MAIN MENU ]

1.Create RAID Volume

2.Delete RAID Volume

3.Reset Disks to Non-RAID

4.Exit

[ DISK/VOLUME INFORMATION ]

RAID Volumes :

None Defined.

Physical Disks :
Port	Driver Model	Serial #	Size	Type/Status(Vol ID)
0	ST3120026AS	3JT354CP	111.7GB	Non-RAID Disk
1	ST3120026AS	3JT329JX	111.7GB	Non-RAID Disk
	[ ]-Select		[ESC]-Exit	[ENTER]-Select Menu

Figure 5

GA-G1975X Motherboard - 82 -