Intel GA-G1975X Configuring a Multi-Graphics Cards System, Configuring a Multi View System

English

1-6 Configuring a Multi-Graphics Cards System

1-6-1 Configuring a Multi View System

This function is supported only on Windows XP operating system.

With Multi View technology from GIGABYTE, Dual Graphic enabled motherboards offer multiple display support on up to eight separate monitors. This improves the capabilities and productivity of the user by allowing them to spread multiple windows over eight monitors and view them simultaneously.

Multiple display support for increasing productivity

Multiple display support for immersive video

Before you begin--

The exact power requirement will depend on your overall system configurations. You need a power supply that can provide sufficient and stable power to your system and the two graphics cards. We recommend a power supply that supplies 400W (or above) and 25A (or above) +12V current.

If you wish to enable the Multi View function, install two or three similar graphics cards into the PCIE_16_1, PCIE_16_2, PCIE_4_1, PCIE_4_2 slots(Note). (It is recommended to use graphics cards of identical brand and chips. For example: GIGABYTE GV-NX66T128D).

If you want to set up a single or dual graphics card system, we recommend installing the graphics card(s) on the PCIE_16 slot(s) to ensure better display performance.

(Note) In order to enable the Dual Graphic function correctly, you have to install at least one graphics

card into the PCIE_16 slot.
GA-G1975X Motherboard	- 18 -