2. Setting Up Your Phone
Caller ID Call Log
To set or assign Caller ID Logging for an extension using either a
1.Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF
2.Enter: 10, press HOLD HOLD, and enter: Log Control Number.
3.Press HOLD, dial the Extension Number, and press HOLD to store the entry.
4.To set CID Log for additional extensions, press the VOLUME up or down arrow or HOLD to move to the desired extension.
5.Repeat step 3 until all extensions are entered.
6.Press MEMORY PROG to return to
OR...
Press MEMORY ON/OFF to exit User Maintenance.
Day/Night System Mode
To set the Day of Week modes using either a
1.Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF
2.Enter: 07, press HOLD, enter: 3, and press HOLD HOLD.
3.Enter pattern: (0 - no pattern, 1 - pattern 1, 2 - pattern 2, 3 - pattern 3) for the first Sunday and press HOLD to store the entry.
Note: To clear an entry or existing data, press the FL/R key.
4.To set additional Day of Week modes, press the VOLUME up or down arrow or HOLD to move to the desired mode.
5.Repeat steps
Note: Entry positions are listed in Section 700 - Feature Operations.
6.Press MEMORY PROG to return to
OR...
Press MEMORY ON/OFF to exit User Maintenance.
38 | ICX (International), issued October 2000 |