2.Setting Up Your Phone

7.Press MEMORY PROG to return to “81-User Maintenance” (step 1).

OR...

Press MEMORY ON/OFF to exit User Maintenance.

To set the Special Day Modes using either a large-display or small-display phone:

1.Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF

2.Enter: 07, press HOLD, enter: 1, and press HOLD HOLD.

3.Enter: Start Time in Hours - 2 characters, and Minutes - 2 characters for the Special Day 1 mode and press HOLD to store the entry.

Note: To clear an entry or existing data, press the FL/R key.

4.Enter: Desired mode for Special Day: 0 - None, 1 - Day 1, 2 - Day 2, 3 - Night, 4 Night 1, 5 - Night 2 and press HOLD to store

the entry.

Note: To clear an entry or existing data, press the FL/R key

5.To set additional Special Day modes, press the VOLUME up or down arrow or HOLD to move to the desired mode.

6.Repeat steps 3-5 until all Special Day modes are set. (Up to 20 Special Days may be entered.).

Note: The entry positions are listed in Chapter 4 of Section 700 - Feature Operations.

7.Press MEMORY PROG to return to “81-User Maintenance” (step 1).

OR...

Press MEMORY ON/OFF to exit User Maintenance.

Message Key

To set the Message Key ID code using either a large- display or small-display phone:

1.Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF

2.Enter: 06 and press HOLD HOLD.

3.Dial the Extension Number of the Phone Being

Programmed and press HOLD.

40

ICX (International), issued October 2000

ICX-50-750

Page 40
Image 40
Panasonic S-ICX manual Message Key