2. Setting Up Your Phone
ICX-50-750 ICX (International), issued October 2000 41
To set extension names using either a large-display or small-display phone:
4. Enter: Message Key ID Code and press HOLD to store the entry.
Note: The ID code may contain up to 16 digits and contain 0, 1-9, *, #, pause (REDIAL
key).
• To clear an entry or existing data, press the FL/R key.
5. To set additional Message Key ID codes, press the VOLUME up or down
arrow or HOLD to move to the desired extension.
6. Repeat steps 4-5 until all Message Key ID codes are set.
7. Press MEMORY PROG to return to “81-User Maintenance” (step 1).
OR...
Press MEMORY ON/OFF to exit User Maintenance.
1. Enter “User Maintenance” by pressing ON/OFF PROG * * CONF
2. Enter: 03 and press HOLD HOLD HOLD.
3. Dial the Extension Number and press HOLD.
4. Enter: Extension Name:
• If using a large-display phone, press the soft key next to the desired row of letters.
• If using a small-display phone press the appropriate one-touch key.
Note: Press the FL/R key to clear any existing data
5. Use the bottom row of FF keys to select a single letter.
Notes: • Press the * key to erase a single entry.
• Press the # key to enter a space.
6. Repeat steps 4-5 as many times as necessary to enter the desired speed dial
name.
Note: Press the FL/R key to clear the entire entry.
7. Press HOLD to store the entry.
8. To set additional extension names, press the VOLUME up or down arrow or
HOLD to move to the desired SSD.
Name Assignments