2. Setting Up Your Phone

To set the Exception Day Modes using either a large- display or small-display phone:

1.Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF

2.Enter: 07, press HOLD, enter: 2, and press HOLD HOLD.

3.Enter: Start Date by Month - two characters and Day - two characters for Exception Period 1 and press HOLD to store the entry.

Note: To clear an entry or existing data, press the FL/R key.

4.To set additional Exception Day modes, press the VOLUME up or down arrow or HOLD to move to the desired mode.

5.Repeat steps 4-5 until the remaining days in the month are set.

6.Press MEMORY PROG to return to “81-User Maintenance” (step 1).

OR...

Press MEMORY ON/OFF to exit User Maintenance.

To set the Mode Schedule using either a large-display or small-display phone:

1.Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF

2.Enter: 07, and press HOLD HOLD HOLD.

3.Enter: Start Time in Hours (two characters) and Minutes (two characters) for Pattern 1 - first mode and press HOLD.

Notes: To clear an entry or existing data, press the FL/R key.

4.Enter: Desired Mode for Pattern 1 - first (0 - None, 1 - Day 1,

2 - Day 2, 3 - Night, 4 - Night 1, 5 - Night 2) and press HOLD to

store the entry.

Note: To clear an entry or existing data, press the FL/R key.

5.To set additional mode schedules, press the VOLUME up or down arrow or HOLD to move to the desired mode.

6.Repeat steps 3-5 until all patterns and modes are set. (There are 3 total patterns with 5 start time/modes each.)

Note: Entry Positions are listed in Chapter 4 of Section 700 - Feature Operations.

ICX-50-750

ICX (International), issued October 2000

39

Page 39
Image 39
Panasonic S-ICX manual Setting Up Your Phone