2.Setting Up Your Phone

9.Repeat steps 4-8 until all extension names are entered.

10.Press MEMORY PROG to return to “81 - User Maintenance” (step 1)

OR...

Press MEMORY ON/OFF to exit User Maintenance.

Send Text Messages

To create Send Text Messages using either a large-display or small-display phone:

1.Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF.

2.Enter: 11, press HOLD, enter: 0, and press HOLD.

3.Press HOLD, enter: Message Number (0-9), and press HOLD.

4.Enter: Text Message (up to 15 characters):

If using a large-display phone, press the soft key next to the desired row of letters.

If using a small-display phone press the appropriate one-touch key.

Note: Press the FL/R key to clear any existing data.

5.Use the bottom row of FF keys to select a single letter.

Notes:

Press the * key to erase a single entry.

Press the # key to enter a space.

6.Repeat steps 4-5 as many times as necessary to enter the desired Text Message and press HOLD to store the entry.

Note: Press the FL/R key to clear any existing data.

7.To set additional text messages, press the VOLUME up or down key or press HOLD to move to the desired Send Text Message.

8.Repeat steps 4-7 until all Send Text Messages are entered.

9.Press MEMORY PROG to return to “81-User Maintenance” (step 1).

OR...

Press MEMORY ON/OFF to exit User Maintenance.

42

ICX (International), issued October 2000

ICX-50-750

Page 42
Image 42
Panasonic S-ICX manual Enter Text Message up to 15 characters, Send Text Messages