6. Using Additional Features
84 ICX (International), issued October 2000 ICX-50-750
3. Dial the number of the party you want to add to the call.
4. Press the CONF key when your call is answered. (You are connected to the
called party.)
5. To add another party repeat steps 1-4.
6. For 3-party Conference Call Only:
To release a conference member, press PROG + 1 to release conference member
1 or press PROG + 2 to release conference member 2, etc.
Note: The conference member numbers are shown on the display.
7. To drop out of the conference call, hang up.
1. While on a call, press the CONF + 1 (2) to have a private conversation with the
CNF 1 (2) party.
2. To reestablish the conference, press CONF.
1. During an conference with more than 3 parties, press CONF + (n) (where n is the
number 1-8 for the conference parties) to individually select a conference party.
2. If you did not select the conference party that is giving busy tone, re-enter the
conference by pressing CONF.
3. If you selected the conference party that is giving busy tone, hang up and then go
off-hook again and press CONF to re-enter the conference call.
Note: If the originating party hangs up, all conference calls will be terminated.
1. Hang up or press the FL/R key or the ON/OFF key.
CONTROLLING BACKGROUND MUSICIf your system is set up with a music source, you can play music over the speaker of
your phone. (If Music On Hold is provided with your system, callers will
automatically hear music when you place them on hold.)
To establish a two party private conversation from a 3-party
conference (Version 3.5 and higher)
To remove a busy tone (hang up) from an 8-party conference
(Version 3.5 and higher)
To drop out of a conference call