Panasonic S-ICX manual Transferring Calls, Supervised Transfers

		4. Handling Incoming Calls
To retrieve a call . . .		Do . . .
From a different extension	Press the FF key that is flashing red.
than the one that placed the
call on hold
From Floating Hold (also	a.	Press the Floating Hold FF key.
known as Station Park Pick		OR
Up)
	a.	Enter the Floating Hold Answer code (default
		= *9).
	b. Enter the Floating Hold orbit number (001-
		576[CPC-288/576], 01-96[CPC-96, HS/HM]
		or 001-099[CPC-288/576] or 01-09[CPC-96,
		HS/HM]. See the note below.

Note: The number of floating hold orbits available may very depending on the Station Park/Floating Hold Pickup setting (FF1-0-02-0025). The station park/floating hold pickup code can be set to *9 (default), 733 (UK/HK), or 733#. The floating hold pickup code (*9) operates as follows:

System Size	Virtual Line Number and Operation
96	01-09 Floating Hold pick up
	10-96: Station Park Hold pick up purpose
Above 96	001-099 Floating Hold pick up
IXC system only	100-576: Station Park Hold pick up purpose

TRANSFERRING CALLS

You can transfer a call to an open extension, a busy extension, or an outside line. These transfers can be either supervised or unsupervised.

Note: If a transferred call is not answered within a specified time, the call rings again at the extension that transferred it.

Supervised Transfers

In a supervised transfer, you announce the call before transferring it. This allows you to give the recipient information about the call.

To supervise the transfer of a call to another extension or an outside number

1.While on a call, press the HOLD key.

ICX-50-750 ICX (International), issued October 2000 59