2.Setting Up Your Phone

7.To set additional text messages, press the VOLUME up or down key or press HOLD to move to the desired Reply Text Message.

8.Repeat steps 4-7 until all Reply Text Messages are entered.

9.Press MEMORY PROG to return to “81-User Maintenance” (step 1).

OR...

Press MEMORY ON/OFF to exit User Maintenance.

Voice Mail: Set Call-Forward ID Codes

To set the Call Forward ID code using either a large- display or small-display phone:

1.Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF.

2.Enter: 05 HOLD HOLD.

3.Dial the Extension Number and press HOLD.

4.Enter: Call Forward ID Code and press HOLD to store the entry.

Notes:

The ID code may contain up to 16 digits and contain 0, 1-9, *, #, pause (REDIAL key).

To clear an entry or any existing data, press the FL/R key.

5.To set additional additional Call Forward ID Codes, press the VOLUME up or down arrow or HOLD to move to the desired SSD.

6.Repeat steps 4-5 until all SSD indexes are entered.

7.Press MEMORY PROG to return to “81-User Maintenance” (step 1).

OR...

Press MEMORY ON/OFF to exit User Maintenance.

Walking TRS Class of Service (Call Barring)

To set Walking TRS (Call Barring) codes using either a large-display or small-display phone:

1.Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF.

2.Enter: 08 and press HOLD HOLD.

46

ICX (International), issued October 2000

ICX-50-750

Page 46
Image 46
Panasonic S-ICX manual Voice Mail Set Call-Forward ID Codes, Walking TRS Class of Service Call Barring