To originate a call | Panasonic S-ICX manual

6. Using Additional Features

Figure 19. Example Directory Number assignments for Extension 200

When a caller originates a call, the call appears on the first available PDN key. If all PDNs are unavailable, the call will select the INT LED.

When calls come in to a DN, the call appears on the first available DN key. If the call is to your PDN and no PDN key is available, the call appears on the INT LED.

Directory numbers may be assigned to FF keys 25-32. These are non-appearing keys.

Intercom voice calls only go to the PDN extension but light the corresponding NPDN keys red. A tone call follows the appropriate ring status (immediate ring, delayed ring, etc.) for any extension.

To originate a call

1.Lift the handset or press the ON/OFF key.

2.If dialing an outside call, dial the outside line group access code (9 [UK/HK], 0 [Taiwan, Indonesia, Malaysia], or 81-84).

3.Dial the phone number or extension number.

90

ICX (International), issued October 2000

ICX-50-750

Image 90

Panasonic S-ICX manual Example Directory Number assignments for Extension, To originate a call

Contents

Section Key Phone User Guide Page Contents Communicating Within Your Office Caller ID Call Log Page HOW to USE this Manual What this Manual ContainsHong Kong/Other Notation Used For More Information Understanding Your Phone NON-DISPLAY Phones Non-display phone features Feature Description Small-display phone Small-display phone features SMALL-DISPLAY Phones Feature Description Changing the Default Display To display the Directory Mode on a small-display phoneUnderstanding Display Information Using Variable Mode To activate Variable Mode on a small-display phone To use Variable Mode on a small-display phone LARGE-DISPLAY Phones Large-display phone features To display a directory or menu on a large-display phone Personal Dial System Dial Extension Function System Function EXT This page intentionally left blank Adjusting Volume and Display Settings To adjust the volume of your phone while it is in useTo adjust the ringer volume of your phone while it is idle To set up FF keys Setting UP Flexible Function KeysTo adjust the display contrast of your phone Then To clear an FF key’s programming Setting UP ONE-TOUCH KeysTo check the FF key’s setup To program a one-touch key for an outside phone number To assign a feature code or extension number to a one-touch To assign an SSD number to a one-touch keyTo check a programmed one-touch key Setting UP Speed Dialling Assigning and Deleting PSD Numbers To assign a PSD number to a one-touch or soft key Corresponds to PSD bin onEtc To insert a Enter/Press Memory * 7ORY *2 555-4143 Memory *2 Assigning SSD Numbers Linking System Speed Dial NumbersTo delete a PSD number assigned to a one-touch or soft key Assigning and Deleting Names for PSD Numbers To link speed dial numbers to a PSD binTo use a PSD key that links multiple speed dial numbers To assign a name to a PSD number Name assignment example small-display phone Name assignment example large-display phone To delete a name assigned to a PSD number Setting User Maintenance Functions Redial To Enter User Maintenance Mode Absence Messages Hold Hold Account Codes Call Forwarding Day/Night System Mode Caller ID Call Log Setting Up Your Phone Message Key Name Assignments Enter Text Message up to 15 characters Send Text Messages Enter SSD Bin Number 00-79 or 000-799 and press Hold Speed Dial Conf System Clock Date/Time/Day Text Message Replies Walking TRS Class of Service Call Barring Voice Mail Set Call-Forward ID Codes Setting Up Your Phone This page intentionally left blank Accessing AN Outside Line To make an outside call using an outside line access codeTo make an outside call using an FF key Non-verified Account Codes Using Account CodesTo cancel a callback request To have a busy outside line call you back once it is open To enter a non-verified account code during a call Redialing Outside NumbersVerified Account Codes To make an outside call that requires an account code Dialling Speed Dial Numbers Using Speed DiallingTo cancel automatic repeat dialling To redial the last number dialled To dial a speed dial number by pressing a one-touch key Checking Speed Dial Numbers Placing Outside Calls This page intentionally left blank Answering Calls To answer a callTo answer Do the following To use Broker’s Hold and toggle between two calls Using Call HoldTo place a call on hold To retrieve a call placed on hold, do one of the following Transferring Calls Supervised TransfersSystem Size Virtual Line Number and Operation Unsupervised Transfers To transfer a call to a busy extension To use Extension Group Pickup All Calls Call PickupExtension Group Pickup To use Extension Group Pickup External Calls Extension Direct Pickup Trunk Group PickupTrunk Direct Pickup To retrieve a call parked at another Extension Call ParkTo park a call on this extension To park a call at another extension To retrieve a call parked on this extension Calling Other Extensions To call another extension by entering the extension number Switching Between Tone and Voice Calling To switch between tone to voice calling Answering a Page Meet-Me Answer Using PagingTo answer a page using Meet-Me Answer To page another party or make an announcement Making Announcements to Busy Extensions To answer a UNA call using the assigned FF keyAnswering a page with Universal Night Answer To answer a UNA call Transferring Calls with an Announcement Using Call ForwardingAnswering an Announcement To speak to the announcing party 741# To set Call ForwardingTo forward 742# To cancel Call Forwarding To set for a PDN from an Npdn or Pnpdn751# 753# Using CAMP-ON Call Waiting752# Message No Message Text Text Message Replies To use Automatic Camp-on Call Waiting To answer a Camp-on Call Waiting signal To leave a text message while camp-onTo reply to a text message Using Message WAITING/CALLBACK To send a Message Waiting/Callback requestTo respond to a Message Waiting/Callback request To turn DND on Using DO-NOT-DISTURBTo turn DND on 720# To cancel DND Using Absence MessagesTo cancel DND To assign the Absence Message To cancel the Station Lockout feature To cancel the Absence MessageTo activate the Station Lockout feature Locking Your Extension To cancel the Station Lockout feature for another extension To change the Walking TRS/Station Lockout security codePage Using the MIC KEY To block outgoing audio using the MIC key To use system features without lifting the handset Using OFF-HOOK MonitorUsing Handsfree Answerback and Handsfree Operation To put a call on speaker Making Conference Calls Using Voice RecognitionUsing the Flash Feature To establish a conference call Controlling Background Music To drop out of a conference call Using Timed Reminders Using Caller IDCaller ID Call Log Call Log Operation for a Small-display Phones Call Log Format for the Large-Display Phone Walking TRS Call Barring Class of Service To use a Walking TRS Call Barring COS code Using Directory Numbers Example Directory Number assignments for Extension To originate a call To originate a call using a non-primary directory number To receive a call using a non-primary directory numberTo receive a call to a directory number PDN or Npdn To set up a monitored extension Using ZIP ModeTo enter or cancel Zip mode Room Monitoring To set up the monitoring extension Silent MonitorTo Initiate Silent Monitor Silent Monitor Key Color Definitions FF Key Color Definition Possible Operation Appendix A. Dial Code List Appendix A. Dial Code List Appendix A. Dial Code List Appendix A. Dial Code List Appendix A. Dial Code List 100 ICX International, issued October ICX-50-750 PSD Bin PSD Number PSD Name Appendix B. Customized PSD Bin Numbers