Panasonic S-ICX manual Assigning and Deleting Names for PSD Numbers

2. Setting Up Your Phone

Notes:

•Before linking multiple SSD numbers to a PSD bin, the SSD bins must already have been programmed with the appropriate speed dial information. (This requires system programming.)

•If numbers do not appear on the display (00-79or 000-799) when you use SSD codes, your extension is not programmed to display that data.

To link speed dial numbers to a PSD bin

1.Pick up the handset or press the ON/OFF key.

2.Either:

• Press the PROG key and then press the MEMORY key.

OR

• Enter the Speed Dial Set/Clear code (default = 710 (HK/UK) or 710#).

3.Press the soft or one-touch key (for the PSD bin [80-99]) to be programmed.

4.Press the MEMORY key.

5.Enter the SSD bin number that contains the first part of the number to be dialled. (If a pause is required, press the REDIAL key.)

6.Repeat steps 4-5 (up to 5 more times) for each remaining SSD number to be linked.

7.Press the HOLD key when you are finished.

8.Replace the handset or press the ON/OFF key.

To use a PSD key that links multiple speed dial numbers

1.If necessary, select the trunk group (9 [UK/HK], 0 [Tawain, Malaysia, Indonisia], or 81-84) to access an outside line. (Normally the trunk is selected by the speed dial numbers.)

2.Press the PSD key.

Assigning and Deleting Names for PSD Numbers

After assigning a PSD number to a one-touch or soft key, you can assign a name to the key (e.g., “Home,” “John,” etc.). You can then view the assigned PSD name when you are in the PSD Directory mode.

ICX-50-750 ICX (International), issued October 2000 29