3Com MSR 50, MSR 30 manual 147, LS0US

147

	AS0 (DS)	LS0(US)
Rate(Bytes):	238	26
Rate(kbps):	7616	832
Latency:	Intlv	Intlv
FEC(fast):	0	0
S/D/R(Inlv):	1/64/16	8/8/16

DMT Bits Allocation Per Bin (Up/Down Bits:249/2148)

00:0 0 0 0 0 0 7 8 a a a a 8 a b c c c b b b b b b 9 9 a a 9 8 8 0

20:0 0 0 0 2 2 2 3 4 4 5 6 6 7 7 8 8 8 8 8 9 9 a a a a a a a 8 9 a

40:0 a a a a b b b b b a b b b b b b b b b b b b b b b b b b b b b

60:b b b b b b b b b b b b b b b b b b b a 9 4 a b b b b b b b b b

80:b b b b b b b b b b b b b b b b b b b b b b b b b b b b b b b b a0: b b b a b a b a b b a b b b b b a a b a a b b a a a a a a a a a

c0: a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

e0: a 9 9 a 9 9 9 9 9 9 8 9 9 9 9 9 9 9 9 9 8 8 8 8 8 7 7 7 7 6 6 6

Table 4 Description on the fields of the display dsl configuration command

Field	Description
Line Params Set by User	Line parameters at ATU-R end, such as Standard, DMT
	Mode, Framing, and Trellis Coding. Among these
	parameters, you can only modify Standard for test or
	diagnosis, but not the others.
The following information appears after the line is activated.
Actual Config	Real operating parameters after the line is activated
Rate(kbps)	Negotiation rate in kbps, with AS0 (DS) for the downlink
	and LS0 (US) for the uplink
Latency	Latency mode: Fast or Interleave
DMT Bits Allocation Per Bin	Bits allocated to and carried by each bin.

display dsl status

Syntax display dsl status interface atm interface-number

View Any view

Parameter interface-number: Specifies a DSL interface to view the status information about.

Description Use the display dsl status command to display the status information of a specified DSL interface.

Example # Display the status information of the ADSL interface ATM 2/0.

<Sysname> display dsl status		interface atm 2/0
Line Status:	Loss	Of Signal
Training Status:	Idle
Active Params	Near End		Far End
Standard:	G.dmt		G.dmt
SNR (dB):	0.0		0.0
Attn(dB):	0.0		0.0
Pwr(dBm):	0.0		0.0