3Com MSR 30 manual Connection-limit enable, Connection-limit policy, Undo connection-limit enable

2016 CHAPTER 133: NAT CONFIGURATION COMMANDS

Description Use the connection-limit default amount command to set the limit(s) of user connections globally.

Use the undo connection-limit default amount command to restore the default.

By default, the upper limit is 100 and the lower limit is 20.

Example # Configure the upper limit as 200 and lower limit as 50.

<Sysname> system-view

[Sysname] connection-limit default amount upper-limit 200 lower-limit 50

connection-limit enable

Syntax	connection-limit enable
	undo connection-limit enable
View	System view
Parameter	None
Description	Use the connection-limit enable command to enable the connection-limit
	function.
	Use the undo connection-limit enable command to disable this function.
	By default, the connection-limit function is disabled.
	Once this function is enabled, both the connection number and the connection
	rate are limited.
Example	# Enable the connection-limit function.
	<Sysname> system-view
	[Sysname] connection-limit enable

connection-limit policy

Syntax	connection-limit policy policy-number
	undo connection-limit policy { policy-numberall }
View	System view
Parameter	policy-number: Connection-limit policy number, in the range 0 to 19.
	all: Deletes all connection-limit policies.