3Com MSR 50 Priority, Private-line, Undo priority, Syntax private-line string Undo private-line

2633

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program

[Sysname-voice-dial] number-substitute 1 [Sysname-voice-dial-substitute1]

priority

Syntax priority priority-order

undo priority

View Voice entity view

Parameter priority-order: Priority of a voice entity, in the range of 0 to 10. The smaller the value, the higher the priority.

Description Use the priority command to configure the priority of a voice entity.

Use the undo priority command to restore the priority of a voice entity to the default.

By default, the priority level is 0.

If you have configured priority levels for voice entities and the selection priority rules (see “select-rulerule-order” on page 2638, “select-rulesearch-stop” on page 2639, and “select-ruletype-first” on page 2640), the router will first select the voice entity with the highest priority to initiate a call. When this voice entity fails, the router will select a voice entity with the second highest priority to initiate a call.

Example # Set the priority level of voice entity 10 to 5.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program [Sysname-voice-dial] entity 10 pots [Sysname-voice-dial-entity10] priority 5

private-line

Syntax private-line string

undo private-line

View FXS/FXO/E&M voice subscriber line view

Parameter string: E.164 telephone number of the terminating end, a string of 31 digits/characters, which can include 0 through 9, “*” and “#”.