3Com MSR 50, MSR 30 manual Description on the fields of the display rip command, 1163

1163

Parameters process-id: RIP process number, in the range of 1 to 65535.

vpn-instancevpn-instance-name: Specifies a VPN instance name, a string of 1 to 31 characters.

Description Use the display rip command to display the current status and configuration information of the specified RIP process.

■If process-idis not specified, information about all configured RIP processes is displayed.

■If vpn-instance-nameis specified, the RIP configuration of the specified VPN instance is displayed.

Examples # Display the current status and configuration information of all configured RIP processes.

<Sysname> display rip

Public VPN-instance name :
RIP process : 1
RIP version : 1
Preference : 100
Checkzero : Enabled
Default-cost : 0
Summary : Enabled
Hostroutes : Enabled
Maximum number of balanced paths : 8
Update time :	30	sec(s)	Timeout time	:	180 sec(s)
Suppress time :	120	sec(s)	Garbage-collect time :		120 sec(s)

TRIP retransmit time :	5 sec(s)
TRIP response packets retransmit count :		36
Silent interfaces : None
Default routes : Disabled
Verify-source : Enabled
Networks :
192.168.1.0
Configured peers : None
Triggered updates sent : 0
Number of routes changes : 0
Number of replies to queries : 0
Table 278 Description on the fields of the display rip command
Field	Description
Public VPN-instance name (or	The RIP process runs under a public VPN instance/The RIP
Private VPN-instance name)	process runs under a private VPN instance
RIP process	RIP process number
RIP version	RIP version 1 or 2
Preference	RIP route priority
Checkzero	Indicates whether the zero field check is enabled for RIP-1
	messages.
Default-cost	Default cost of the redistributed routes
Summary	Indicates whether the routing summarization is enabled
Hostroutes	Indicates whether to receive host routes
Maximum number of balanced	Maximum number of load balanced routes
paths
Update time	RIP update interval