3Com MSR 30, MSR 50 manual Example # Display information about sessions, Lam, MD5

1526 CHAPTER 95: MPLS BASICS CONFIGURATION COMMANDS

Description Use the display mpls ldp session command to display information about specified or all sessions.

Related command: mpls ldp (system view), mpls ldp (interface view).

Example # Display information about sessions.

<Sysname>display mpls ldp session

LDP Session(s) in Public Network Total number of sessions: 1

--------------------------------------------------------------------------

Peer-IDStatus LAM SsnRole FT MD5 KA-Sent/Rcv

--------------------------------------------------------------------------

1.1.1.1:0Operational DU Active Off Off 4582/4582

--------------------------------------------------------------------------

LAM : Label Advertisement Mode		FT : Fault Tolerance
Table 377 Description on the fields of the display mpls ldp session command
Field	Description
Total number of sessions	Number of sessions
Peer-ID	LDP identifier of the peer
Status	Status of the session
LAM	Label advertisement mode of the session
SsnRole	Role of the current LSR in the session, Active or Passive
FT	Whether GR FT is enabled on the peer for the session
MD5	Whether MD5 is enabled on the peer
KA-Sent/Rcv	Number of sent Keepalives and that of received Keepalives
	during the session

# Display detailed information about all sessions.

<Sysname> display mpls ldp session verbose LDP Session(s) in Public Network

--------------------------------------------------------------------------

Peer LDP ID		: 1.1.1.1:0	Local LDP ID	: 3.3.3.3:0
TCP Connection		: 3.3.3.3 -> 1.1.1.1
Session	State	: Operational	Session Role	: Active
Session	FT Flag : Off		MD5 Flag	: Off
Reconnect Timer : ---			Recovery Timer : ---

Negotiated Keepalive Timer	: 45 Sec
Keepalive Message Sent/Rcvd	: 6/6 (Message Count)
Label Advertisement Mode	: Downstream Unsolicited
Label Resource Status(Peer/Local)	: Available/Available
Peer Discovery Mechanism	: Extended
Session existed time	: 000:00:01 (DDD:HH:MM)
LDP Extended Discovery Source	: Remote peer: 1

Addresses received from peer: (Count: 2)

10.1.1.11.1.1.1

--------------------------------------------------------------------------

Peer LDP ID	: 2.2.2.2:0	Local LDP ID	: 3.3.3.3:0
TCP Connection	: 3.3.3.3 -> 2.2.2.2
Session State	: Operational	Session Role	: Active

Session FT Flag		: Off		MD5 Flag	: Off
Reconnect	Timer	: ---		Recovery Timer : ---
Negotiated Keepalive Timer			:	45 Sec
Keepalive	Message Sent/Rcvd		:	25/25 (Message Count)