3Com MSR 50, MSR 30 manual Debugging lacp state, 487

487

debugging lacp state

Syntax debugging lacp state [ interface interface-type interface-number [ to interface-type interface-number ] ] { { actor-churnmux partner-churnptx rx } * all }

undo debugging lacp state [ interface interface-typeinterface-number[ to interface-typeinterface-number] ] { { actor-churn mux partner-churn ptx rx } * all }

View User view

Default Level 1: Monitor level

Parameters interface-type interface-number: Port type and port number.

to: Specifies the ports with their port type and port number within the port range enclosed by the two interface-type-interface-numberargument pairs around this keyword.

actor-churn: Debugging for Actor-churn state machine.

mux: Debugging for MUX state machine.

partner-churn: Debugging for Partner-churn state machine.

ptx: Debugging for PTX state machine.

rx: Debugging for RX state machine.

all: Debugging for all the state machines.

Description Use the debugging lacp state command to enable debugging for LACP protocol state machines on the specified port(s).

Use the undo debugging lacp state command to disable debugging for LACP protocol state machines on the specified port(s).

By default, debugging for LACP protocol state machines is disabled on a port.

If no port is specified, the command applies to all the ports running LACP.

Table 77 Description on the fields of the debugging lacp state command

Field	Description
from state XXX	The original state of a state transition
to state XXX	The final state of the state transition
stimulation	The event that triggers the state transition

Examples # Enable debugging for Rx state machine on Ethernet 2/1 to view the information about LACP Rx state transition.