3Com MSR 30, MSR 50 x25 switch svc hunt-group

461
Example # Configure an SVC to forward the packet to the X.121 address 20112451
through interface Serial2/0.
<Sysname> system-view
[Sysname-Serial2/0] x25 switch svc 20112451 interface serial 2/0
# Configure an SVC to forward the packet to the address 3 through the Annex G
DLCI 100 of interface Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] link-protocol fr
[Sysname-Serial2/0] fr dlci 100
[Sysname-Serial2/0] annexg dce
[Sysname-Serial2/0] quit
[Sysname] x25 switch svc 3 interface serial 2/0 dlci 100
x25 switch svc hunt-group
Syntax x25 switch svc x.121-address [sub-dest destination-address | sub-source
source-address] * hunt-group hunt-group-name
undo x25 switch svc x.121-address [sub-dest destination-address] [ sub-source
source-address] [ hunt-group hunt-group-name]
View System view
Parameter x.121-address: Destination X.121 address, a pattern matching string with 1 to 15
numeric characters. For the specific description of pattern matching, see Table69
and Table70. If no wildcard is used, the X.121 address is must be exactly matched.
sub-dest destination-address: X.121 address, an alphanumeric string of 1 to 15
characters. The system replaces the destination DTE address in the call request
packet with the destination-address.
sub-source source-address: X.121 address, an alphanumeric string of 1 to 15
characters. The system replaces the source DTE address in the call request packet
with the source-address.
hunt-group hunt-group-name: Specifies a hunt group.
Description Use the x25 switch svc hunt-group command to add an X.25 switching SVC
whose forwarding address is a hunt group.
Use the undo x25 switch svc hunt-group command to delete the specified
X.25 switching SVC.
By default, no X.25 switching SVC is configured.
Note that:
■After the X.25 switching SVC with forwarding address being a hunt group is
configured, the relevant X.25 call request packet will be forwarded to different