3Com MSR 50 Substitute subscriber line view/voice entity view, Undo substitute called calling

2643

substitute (subscriber line view/voice entity view)

Syntax	substitute { called calling } list-number
	undo substitute { called calling }
View	POTS/VoIP/VoFR voice view/Subscriber line voice entity view
Parameter	called: Applies the number substitution rule to a called number.
	calling: Applies the number substitution rule to a calling number.
	list-number: Serial number of a number substitution rule list configured by using
	the number-substitutecommand), in the range of 1 to 2147483647.
Description	Use the substitute command to bind a calling/called number substitution rule list
	to the voice subscriber line or voice entity.
	Use the undo substitute command to remove the binding between a
	calling/called number substitution rule list and the voice subscriber line or voice
	entity.
	By default, no number substitution rule list is bound to a voice subscriber line or
	voice entity. That is to say, no number substitution is performed.
	Before carrying out the this command, you must first use the number-substitute
	list-numbercommand to configure a number substitution rule list in voice dial
	program view, and then use the rule command to configure rules for the list.

n According to network requirements, you can complete number substitution in the following two ways.

■Before a voice entity is matched, you can use the substitute command in subscriber line view to substitute the calling/called number specific to a subscriber line.

■After a voice entity is matched but before a call is initiated, you can use the substitute command in voice entity view to substitute a specified calling/called number.

Related command: number-substituteand rule.

Example # Apply number substitution rule list 6 to the called number of the voice subscriber line 1/0.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] subscriber-line1/0

[Sysname-voice-line1/0] substitute called 6