The “Come” Command
1. Put a separate,
long leash. Note: Be sure the extra collar does not put pressure on the Contact Points.
2. Hold your leash in one hand and the Handheld Transmitter in the other.
3. Wait for your pet to walk away from you. 4. To start with Vibration, press and hold the
Top Button (light blue), while saying “Come”
and if necessary use the leash to guide your pet toward you.
5. Immediately release the button as soon as
your pet steps toward you, and praise him
enthusiastically.
6. Quickly move backwards as your pet begins 
to come toward you, praising him the entire
time. Stop moving backwards and praise your pet when he returns to you.
7. Repeat steps 3 to 6 several times. 8. If your pet comes to you reliably on receiving
the spoken “Come” command, then training is complete. Release your pet and praise him. If not, move on to Step 9.
9.Wait for your pet to walk away from you. Using the Recognition Level for your pet, press and hold the Middle
Button (medium blue on the
10. Immediately release the button as soon as your pet steps toward you, and praise him enthusiastically. Note: If a Static Stimulation button is held up to 12 continuous seconds, the LED will flash rapidly to indicate a safety
11.Quickly move backwards as your pet begins to come toward you, praising him the entire time. Stop moving backwards and praise your pet when he returns to you.
12.Repeat steps 9 to 11 several times.
13.If your pet now comes to you reliably with the spoken “Come” command, he may now be ready to respond without Static Stimulation. Take a play break and then go back and repeat from Step 3 with Vibration only.
www.petsafe.net | 15 |
