PERFORMANCE

OPTIONS AND ACCESSORIES

28 998: CRANK TIMER - Mechanical timer to activate high speed.

*28 880: DIGITAL ELECTRONIC TIMER (DET) -

20, 40 or 60 minutes of high speed at the touch of a button.

*28 881: PROGRAMMABLE VENTILATION

CONTROL (PVC) - Activates high speed via built in 99-109 Air Sentry, dehumidistat and 24 hour timer.

28 883: COMMERCIAL INTERFACE CONTROL

(CIC) - Connects low voltage terminals on HRV to specified digital controls above.

SPECIFICATIONS

General: Unit shall be completely wired and includes blowers, filters, heat exchange cores and control panel.

Performance: 70% effective at 2500 cfm (1172 L/s)

Air Flow: 2100 cfm (985 L/s) at 1.0" wg ESP

Cabinet: 89.9” x 38.4” x by 47” H. Constructed of 20 gauge powder coated galvanized steel (G60) for superior corrosion resistance. 16 gauge galvanized frame, insulated with 1.5" fiberglass insulation to prevent condensation.

Heat Exchange Core: Modular aluminum sensible heat recovery core. Plate-to-plate type. Slides out of either side of cabinet for service.

Air filter: Two 18" x 24" - 4 inch pleated filters in each air stream.

Motors: Two single shaft PSC, 3-speed, 208/230V, 5.1 amps. 1 ph, 1 hp.

Blowers: Two direct drive centrifugal blowers, one per air stream.

Controls: 24 V terminals strip inside electrical box, to connect optional remote controls (not included), obtain on/off and high/low functions.

Defrost: Factory set defrost time 10 min. defrost, 30 minutes normal operation. Defrost cycle begins at temperature's below 26°F (-4°c) (user adjustable). Supply motor is shut off while exhaust air defrosts core.

Duct Connections: Four 24" x 16" (610mm x 406mm)

Drain: Two stainless steel drain pans with 3/4" drain spouts.

Mounting: Unit to be set on support brackets hung by threaded rod type apparatus. (Brackets and rods not included.)

Weight: 700 lbs Shipping Weight: 780 lbs

Manufacturer: American ALDES Ventilation Corp., 4537 Northgate Court, Sarasota, FL 34234

Model 2500SFDE

Roof Curb

28 882 DEHUMIDISTAT - Activates high speed when indoor humidity rises above set point on control

*These devices require connection to the 28 883

CIC

 

 

40 104: 4" ALGRILLE

40 106: 6" ALGRILLE

40 105: 5" ALGRILLE

40 108: 8" ALGRILLE

Round, white step-type diffusers.

Note: Manufacturer

 

 

reserves the right to change

WARRANTY

specifications without notice.

Units carry a 15 year

 

 

warranty on the heat

All units conform to

recovery core and a 2

CSA and UL

year replacement

Standards

 

parts warranty.

PROJECT

 

DATE

 

 

 

 

 

Model 2500SFD

SUBMITTED BY

CONTRACTOR

 

 

SIDE VIEW

MATHEWS GRAPHIC DESIGN 941-358-0862

VENTILATION

4537 NORTHGATE COURT SARASOTA, FL 34234-2124, USA Tel: 941 • 351- 3441

Fax: 941 • 351- 3442

www.americanaldes.com

 

info@aldes-us.com

SyQ11-412HRV-4-03

 

Page 17
Image 17
American Aldes HRV 700SFD, HRV 700SDD manual 28 880 Digital Electronic Timer DET, 28 881 Programmable Ventilation, Side View

HRV 700SFD, HRV 700SDD specifications

The American Aldes HRV 700SFD and HRV 700SDD are advanced heat recovery ventilators designed to enhance indoor air quality while maintaining energy efficiency. These units are ideal for both residential and commercial applications, providing a balanced airflow that promotes a healthier living environment.

One of the main features of the HRV 700SFD and HRV 700SDD is their exceptional heat recovery capability. These ventilators can recover up to 80% of the heat from stale indoor air, transferring it to the incoming fresh air. This process significantly reduces heating and cooling costs, making the units highly economical and environmentally friendly.

These models are equipped with advanced energy-efficient ECM (Electronically Commutated Motor) fans, which provide quiet operation and optimal airflow. The ECM motors adjust their speed automatically according to demand, ensuring that the system operates at peak efficiency without compromising comfort.

The HRV 700SFD features a vertical configuration, making it suitable for tight spaces or applications where ceiling height is limited. On the other hand, the HRV 700SDD is designed with a horizontal configuration, making it an excellent choice for situations where horizontal space is a consideration. Both models allow for easy installation and maintenance, as their thoughtfully engineered design facilitates access to key components.

Furthermore, these heat recovery ventilators include a robust control system that allows for customizable operation. Users can set specific operating modes and schedules, ensuring that the ventilation aligns with their unique lifestyle needs while optimizing energy use. The models come with both wall-mounted and remote control options for added convenience.

The exchange core used in both the HRV 700SFD and HRV 700SDD is made from durable materials that resist moisture and mold growth, ensuring longevity and hygienic performance. Moreover, the units are backed by American Aldes’ commitment to quality, providing peace of mind to consumers.

In summary, the American Aldes HRV 700SFD and HRV 700SDD are outstanding choices for heat recovery ventilation. With their high heat recovery efficiency, advanced ECM motors, versatile configurations, and user-friendly controls, they stand out as practical solutions for achieving superior indoor air quality while reducing energy consumption.