HRV P1200SDD

HEAT RECOVERY VENTILATOR

POOL MODEL

PRODUCT

SPECIFICATIONS

AND ENGINEERING

INFORMATION

-----

SUBMITTAL DATA

460 - 0403

ALDES Pool Model Heat Re- cover Ventilators are designed to exhaust humid air from indoor swimming pools and spa area and to supply tempered fresh air from outdoors. It incorporates an efficient aluminum core for heat recovery of waste heat to temper the fresh outdoor air, to provide and economical solu- tion to excessive humidity, odor, stuffiness, and other indoor air

pollutants. The model P1200SDD is intended for small commercial, institutional, and residential applications for pool and wetted deck areas up to 1000 square feet.

The pool model has three modes of operation to meet the unique

ALDES HRV P1200SDD

Heat Recovery Ventilator

for Swimming Pools

Standard Damper

Defrost

PART NO. 28 111

needs of pools. The normal ventilation mode provides ex- haust of humid air and supply of fresh outdoor air, with heat re- covery in the efficient aluminum cores. This mode is controlled by an adjustable dehumidistat that opens the fresh air damper to the outdoor air intake, and

the recirculation air circuit. This mode maintains constant air cir- culation in the conditioned space, and a means of heating the con- ditioned space if a duct heater or hot water coil is installed in the supply duct.

The third mode of operation pro- vides automatic defrost by shut- ting off fresh air intake in a cycle of 4.5 minutes off, 17 minutes on. The defrost cycle occurs when outdoor temperatures are below 27°F (-3°C)

operates both the supply and exhaust fans. (A duct heater or hot water coil may be installed in the supply duct to provide addi- tional heat to the incoming air or recirculating air. This heater would be controlled by a duct mounted thermostat.)

The second mode of operation occurs when the humidity level falls below the setpoint of the dehumidistat. The exhaust fan shuts off, the supply air damper closes off outdoor air, and opens

GENERAL FEATURES

Thermally conductive aluminum heat exchange core, cross-

flow design, easily removed for cleaning or service.

Insulated 20 gauge white powder coated galvanized steel cabinet.

Direct drive centrifugal forward curve blowers, Multi-speed providing 600 to 1100 cfm. one in each air stream.

Two efficient three speed PSC double shafted motors 120 V,

4 Amps each (8.1 Amps total on high speed),

1 ph. 1/4HP, 1625 RPM. Watts - total on high speed - 972.

Washable filters, one in each air stream protect the core. Easy to access and clean.

Installation accessories and controls make installation simple.

Page 11
Image 11
American Aldes HRV 700SFD, HRV 700SDD manual Aldes HRV P1200SDD

HRV 700SFD, HRV 700SDD specifications

The American Aldes HRV 700SFD and HRV 700SDD are advanced heat recovery ventilators designed to enhance indoor air quality while maintaining energy efficiency. These units are ideal for both residential and commercial applications, providing a balanced airflow that promotes a healthier living environment.

One of the main features of the HRV 700SFD and HRV 700SDD is their exceptional heat recovery capability. These ventilators can recover up to 80% of the heat from stale indoor air, transferring it to the incoming fresh air. This process significantly reduces heating and cooling costs, making the units highly economical and environmentally friendly.

These models are equipped with advanced energy-efficient ECM (Electronically Commutated Motor) fans, which provide quiet operation and optimal airflow. The ECM motors adjust their speed automatically according to demand, ensuring that the system operates at peak efficiency without compromising comfort.

The HRV 700SFD features a vertical configuration, making it suitable for tight spaces or applications where ceiling height is limited. On the other hand, the HRV 700SDD is designed with a horizontal configuration, making it an excellent choice for situations where horizontal space is a consideration. Both models allow for easy installation and maintenance, as their thoughtfully engineered design facilitates access to key components.

Furthermore, these heat recovery ventilators include a robust control system that allows for customizable operation. Users can set specific operating modes and schedules, ensuring that the ventilation aligns with their unique lifestyle needs while optimizing energy use. The models come with both wall-mounted and remote control options for added convenience.

The exchange core used in both the HRV 700SFD and HRV 700SDD is made from durable materials that resist moisture and mold growth, ensuring longevity and hygienic performance. Moreover, the units are backed by American Aldes’ commitment to quality, providing peace of mind to consumers.

In summary, the American Aldes HRV 700SFD and HRV 700SDD are outstanding choices for heat recovery ventilation. With their high heat recovery efficiency, advanced ECM motors, versatile configurations, and user-friendly controls, they stand out as practical solutions for achieving superior indoor air quality while reducing energy consumption.