3Com MSR 50, MSR 30 manual State active block

	1945
	undo service-type ppp [ call-number callback-nocheck callback-number ]
View	Local user view
Parameter	call-numbercall-number: Specifies a caller number for ISDN user authentication,
	which is a string of 1 to 64 characters.
	[ : subcall-number]: Specifies the sub-caller number. The total length of the caller
	number and the sub-caller number must be less than 62 characters.
	callback-nocheck: Enables the PPP user callback without authentication feature.
	callback-numbercallback-number: Specifies a callback number, which is a string
	of 1 to 64 characters.
Description	Use the service-type ppp command to authorize a user to use the PPP service
	and configure the callback attribute and caller number of the user.
	Use the undo service-type ppp command to restore their default settings.
	By default, no service is authorized to a user; if the PPP service is authorized,
	callback without authentication is enabled, no callback number is specified, and
	the system does not authenticate the caller number of ISDN users.
Related command:	service-typeand service-type ftp.
Example	# Authorize user user1 to use the PPP service and enable the callback without
	authentication feature.
	<Sysname> system-view
	[Sysname] local-user user1
	[Sysname-luser-user1] service-type ppp callback-nocheck

state

Syntax	state { active block }
View	ISP domain view/local user view
Parameter	active: Places the current ISP domain or local user in the active state, allowing the
	users in the current ISP domain or the current local user to request network
	services.
	block: Places the current ISP domain or local user in the blocked state, preventing
	users in the current ISP domain or the current local user from requesting network
	services.
Description	Use the state command to configure the status of the current ISP domain or local
	user.