3Com MSR 50, MSR 30 Mpls l2vpn vpn-name, Example # Create a Martini Mpls L2VPN connection

1665

Example # Create a Martini MPLS L2VPN connection.

<Sysname> system-view

[Sysname] interface serial 2/0

[Sysname-Serial2/0] mpls l2vc 2.2.2.9 999

mpls l2vpn

Syntax mpls l2vpn

undo mpls l2vpn

View System view

Parameter None

Description Use the mpls l2vpn command to enable MPLS L2VPN.

Use the undo mpls l2vpn command to disable MPLS L2VPN and delete all

L2VPN configurations.

You must use the mpls l2vpn command to enable MPLS L2VPN before configuring the other L2VPN commands.

Example # Enable MPLS L2VPN.

<Sysname> system-view

[Sysname] mpls l2vpn

mpls l2vpn vpn-name

Syntax mpls l2vpn vpn-name[ encapsulation { atm-aal5 ethernet fr hdlc ppp vlan } [ control-word no-control-word ] ]

undo mpls l2vpn vpn-name

View System view/MPLS L2VPN view

Parameter vpn-name: Name for the VPN, a case insensitive string of 1 to 31 characters that cannot include the character of “-”. It is used to identify a VPN uniquely on a PE.

encapsulation: Specifies the VPN encapsulation type.

atm-aal5: Uses ATM AAL5 encapsulation.

ethernet: Uses Ethernet encapsulation.

fr: Uses FR encapsulation.

hdlc: Uses HDLC encapsulation.