3Com MSR 30, MSR 50 manual Display dlsw reachable-cache, Information of DLSw

340CHAPTER 21: BASIC DLSW CONFIGURATION COMMANDS

*145.11.23.58	2		1	1	2067	C CONNECTING
00:00:00
Table 35 Description on the fields of the display dlsw remote command
Field		Description
Remote peer type		Type of the remote peer
		■ D: the remote peer was dynamically learned
		■ C: the remote peer was manually configured
Total peers number		Total number of remote peers
IP address		Remote peer IP address (if preceded by a *, this remote peer can
		establish a connection; otherwise, this remote peer is inactive and
		only serves as a backup)
frame-in		Number of frames the local peer has received from this remote
		peer
frame-out		Number of frames the local peer has sent to this remote peer
frame-drop		Number of frames dropped due to errors while the local peer
		sent/received frames to/from this remote peer
port		Port number for the TCP connection
		■	2065: DLSw v1.0
		■	2067: DLSw v2.0
type		Type of the remote peer
state		Status of the connection:
		■ CONNECT: a TCP connection has been established
		■ DISCONNECT: no TCP connection has been established
		■ CONNECTING: a TCP connection is being established
lifetime		Length of time for which the connection has been up

display dlsw reachable-cache

Syntax	display dlsw reachable-cache
View	Any view
Parameter	None
Description	Use the display dlsw reachable-cachecommand to view the reachability
	information of DLSw.
Example	# Display the reachability information of DLSw.
	<Sysname> display dlsw reachable-cache
	LOCAL MAC addresses in cache
	--------------------------------------------------------------------
	MAC address	Status	Interface		Remain time
	REMOTE MAC addresses in cache
	--------------------------------------------------------------------
	MAC address	Status	Peer	Type	Remain time
	0102-2103-5641	FOUND	2.2.2.2	DYNAMIC	15
	6500-7201-8160	FOUND	1.1.1.1	CONFIG	15