3Com MSR 50, MSR 30 manual Dhcp select server global-pool, Dhcp server detect, 707

707

dhcp select server global-pool

Syntax dhcp select server global-pool [ subaddress ]

undo dhcp select server global-pool subaddress

View Interface view

Parameter subaddress: Supports subaddress allocation. That is, the DHCP server and clients are on the same network segment, and the server allocates IP addresses from the address pool containing the network segment of the first subaddress if several subaddresses exist.

Description Use the dhcp select server global-poolcommand to enable the DHCP server on an interface. After the interface receives a DHCP request from the DHCP client, the DHCP server will allocate an IP address from the address pool.

Use the undo dhcp select server global-pool subaddress command to cancel the support for subaddress allocation.

By default, the DHCP server is enabled on an interface.

Example # Enable the DHCP server on Ethernet1/0.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] dhcp select server global-pool

dhcp server detect

Syntax dhcp server detect

undo dhcp server detect

View System view

Parameter None

Description Use the dhcp server detect command to enable pseudo DHCP server detection. Use the undo dhcp server detect command to disable the function.

By default, the function is disabled.

Example # Enable pseudo DHCP server detection.

<Sysname> system-view

[Sysname] dhcp server detect